Yamaha Trim Cylinder Wave Washer 90206-22M19-00

Yamaha – Trim Cylinder Wave Washer – Power Trim and Tilt Hardware Component – 90206-22M19-00

Overview

When you work around Yamaha trim and tilt systems long enough, you learn the small hardware matters just as much as the big parts. The Yamaha Trim Cylinder Wave Washer 90206-22M19-00 helps maintain proper tension and fit within the trim cylinder assembly so the system stays tight and operates the way it should. It is one of those pieces that often gets overlooked until you are already deep into a repair. Replacing worn hardware during trim system service is a smart move that helps keep everything going back together the right way.

Key Features

• Genuine Yamaha OEM Construction – Built to Yamaha factory specifications for proper fit and dependable service life.
• Maintains Assembly Tension – Helps provide the correct spring pressure within the trim cylinder assembly.
• Direct Replacement Fit – Designed to install correctly in compatible Yamaha power trim and tilt systems.
• Supports Reliable Trim Operation – Helps hardware stay secure during repeated trim and tilt movement.

Engine & Boat Compatibility

• 115 – 1993-2009
• 130 – 1993-2004
• 150 – 1992-2009
• 175 – 1992-2000
• 200 – 1992-2016
• 225 – 1992-2016
• 250 – 1990-2005
• B115 – 1998-1999
• C115 – 1993-2000
• C150 – 1996-1999
• D150 – 1997-1999
• DX150 – 1999-2005
• F115 – 2000-Current
• F150 – 2004-Current
• F175 – 2014-Current
• F200 – 2002-Current
• F225 – 2002-Current
• FL150 – 2010
• L130 – 1993-2001
• L150 – 1992-1999
• L200 – 1992-1999
• L225 – 1994-1999
• L250 – 1990-1999
• LF115 – 2000-Current
• LF150 – 2004-Current
• LF200 – 2002-Current
• LF225 – 2002-2010
• LX150 – 1999-2001
• LX200 – 1999-2001
• LX225 – 2000-2003
• LX250 – 2000-2003
• LZ150 – 2000-2005
• LZ200 – 2000-2012
• LZ250 – 2003-2005
• LZ300 – 2004-2006
• P115 – 1993-1996
• P150 – 1992-1999
• P175 – 1994-1999
• P200 – 1992-1999
• PX150 – 1999
• S115 – 1996-1999
• S130 – 1996-1999
• S150 – 1996-1999
• S175 – 1996-1999
• S200 – 1996-1999
• S225 – 1996-1999
• S250 – 1996-1999
• SX150 – 1999-2004
• SX200 – 1999-2005
• SX225 – 2000-2003
• SX250 – 2000-2003
• V150 – 2000-2008
• V175 – 2000
• V200 – 1998-1999
• V225 – 1998-1999
• VF115 – 2015
• VF150 – 2013-Current
• VF175 – 2015-Current
• VX150 – 2000-2004
• VX200 – 2000-2005
• VX225 – 2000-2004
• VX250 – 2002-2004
• VZ150 – 2000-2014
• VZ175 – 2001-2012
• VZ200 – 2001-2009
• VZ225 – 2003-2009
• VZ250 – 2003-2009
• VZ300 – 2004-2009
• Z150 – 2000-2005
• Z175 – 2001-2005
• Z200 – 2000-2012
• Z250 – 2003-2005
• Z300 – 2004-2006

FAQ

Q: What does a wave washer do in a trim cylinder assembly?
A: It helps maintain spring tension between components so the assembly stays properly seated and supported.

Q: When should a trim cylinder wave washer be replaced?
A: It should be replaced if it looks flattened, corroded, damaged, or worn during trim and tilt service.

Q: Can saltwater use affect this hardware?
A: Yes. Saltwater exposure can lead to corrosion over time, especially in trim and tilt assemblies that are not cleaned regularly.

Q: Is this something I should replace during a trim repair?
A: Yes. If the system is already apart, replacing worn small hardware is a smart way to avoid doing the job twice.

Q: Will a worn wave washer affect trim performance?
A: It can. If the washer no longer holds proper tension, components may not seat as intended inside the assembly.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.